How to make a kite Straight - 6 points

These tips on how to fly a kite straight to virtually anyone to simple home-made kites for the first time. These general points apply only to flat or curved single-liners such as diamond kite. So much depends on the symmetry of the kite material. That is, the narrow margin left and right sides of the kite to one another in various ways.

1. Symmetry with fantasy forms

This is important. In other words, the shape of the wing, on the one hand, an exact reflection of formthe other side. This also ensures that the sail area is exactly the same on both sides. In practice, we can not be perfect, but there are ways to do a great job.

For example, by folding the sail material along the line before measuring and cutting, a kite can be done very symmetrical in form. This will give you a good start, but other things can still go wrong. Some instructions on how to use this classic technique, a dragon.

2. Symmetry in the sailWave

If you are a bit 'sloppy in the kidnapping of the sail to the frame, you can get a panel of the sail can be a bit' more than other cards, when in flight. Try to keep the dragons at the end of the tail, and run through the air inside. If the problem is significant, you can actually see the difference wave in this way.

If you make a kite big enough, this is unlikely. However, with a very small design all kinds of errors can creep in, if necessary,remove and attach the wing and holding the plates.

3. Symmetry in the flexibility

How to make a kite loop control when there is nothing wrong with visible ... This can happen when you fly fresh to strong winds. The reason is that one side of the kite folds more than the others.

synthetic materials such as fiberglass or carbon fiber are not likely to be problems in home-made kites, but natural materials. The solution is a quick check of thisFlexibility in choosing the material for the horizontal bars, or just play with the eye beams.

In light wind conditions, this factor is likely to be a problem because the beams bend easily.

4. Symmetry in weight

If your kite is complete, it could still be a little unbalanced for some reason. Hang to see the dragon from the nose and tail, if one wing tip seems to be heavier than the others.

From my experience, this might be the least important aspect of symmetry. E 'the effect appears at the bottom of the dragon are wind range. In any case, the kite is easy to do with a few pieces of tape at one end of the wing.

5. The lighter the better!

It is not surprising, but did you know that this will have a strong impact on the stability and performance? If it is too much weight on the edges of the sail and / or suggestions for savings, will keep the kite is said to be when it begins to turn for any reason.

How to make aKite light? Pick material that is strong enough to sail, but as light as possible. Use a little tape or glue or whatever you use any other means to bind the materials together. Use the bars that have just stiff enough for the job.

6. Multi-Point Bridle adjustments

Some have to go the reins to the left and right of the kite. I found it very convenient to do some of these displaced bridle knots, so if the kite goes left or right, you have another option forSolve the problem.

Another reason for this switch, so as not to be perfectly accurate with a durable binding node in exactly the correct position. If a node is switched off a bit ', it is easy to push in the right place.

That's all for the tips you are flying. Here's a bonus tip to help you, your kite as high as possible. Use the lightest possible line of flight, making sure it is still strong enough to prevent data loss kite. A rule of thumbis to multiply the sail area in square meters, with 3, which gives the required bearing capacity of the line in pounds.

The line of flight is left out, the greater the burden on the dragon trying to take in addition to its own weight. Therefore, the lighter the line, the higher the kite flying can before they reach their weight limit.

That's all, like a kite that flies straight and high over a wide range of wind speeds to build. If you've tried, a dragon, and has aWind disappointing area, check against all the above points. The solution may be as simple as tightening the sail a bit '. Or discover a curved bar on one side, and then must make a new kite!